12-21-2024 11:01 PM
hi >>> The access point 702i disconnects automatically, and when I tracked the reason, the sys log appeared to me. Can you help me solve this problem? WLC model= 5508 , software ver = 8.5.182.0
12-21-2024 11:02 PM
*Dec 21 07:44:19.879: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed state to down
*Dec 21 07:44:25.379: %LINK-6-UPDOWN: Interface BVI1, changed state to down
*Dec 21 07:44:26.379: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, changed state to down
*Dec 21 07:44:38.747: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 10.9.0.10:5246
*Dec 21 07:44:38.747: %DOT11-5-EXPECTED_RADIO_RESET: Restarting Radio interface Dot11Radio0 due to the reason code 27
*Dec 21 07:44:38.747: %DOT11-5-EXPECTED_RADIO_RESET: Restarting Radio interface Dot11Radio1 due to the reason code 27
*Dec 21 07:44:38.747: %WIDS-6-DISABLED: IDS Signature is removed and disabled.
*Dec 21 07:44:38.759: %CAPWAP-5-AP_EASYADMIN_INFO: AP Easy Admin information - EASY_ADMIN is not set, turn off easy admin service!
*Dec 21 07:44:38.759: %CAPWAP-5-AP_EASYADMIN_INFO: AP Easy Admin information - Easy Admin is not enabled, turn it off!
*Dec 21 07:44:38.799: %DOT11-5-EXPECTED_RADIO_RESET: Restarting Radio interface Dot11Radio0 due to the reason code 39
*Dec 21 07:44:38.799: %DOT11-5-EXPECTED_RADIO_RESET: Restarting Radio interface Dot11Radio1 due to the reason code 39
*Dec 21 07:44:38.823: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to down
*Dec 21 07:44:39.823: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Dec 21 07:44:39.851: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
*Dec 21 07:44:39.859: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to down
*Dec 21 07:44:39.867: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
*Dec 21 07:44:40.851: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
*Dec 21 07:44:40.859: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
*Dec 21 07:44:40.887: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to up
*Dec 21 07:44:41.887: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to up
*Dec 21 07:45:37.447: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed state to up
*Dec 21 07:45:38.759: %CDP_PD-4-POWER_OK: Full power - NEGOTIATED inline power sourceEthernet link changed to speed: 2, duplex 1
*Dec 21 07:45:46.563: %LINK-6-UPDOWN: Interface BVI1, changed state to up
*Dec 21 07:45:47.563: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, changed state to up
*Dec 21 07:45:52.799: %DHCP-6-ADDRESS_ASSIGN: Interface BVI1 assigned DHCP address 10.22.31.121, mask 255.255.255.0, hostname B6-6th-03
Translating "CISCO-CAPWAP-CONTROLLER"...domain server (172.28.0.3) (172.28.10.10)
*Dec 21 07:46:00.467: %CAPWAP-5-DHCP_OPTION_43: Controller address 10.9.0.10 obtained through DHCP
ip admission virtual-ip 0.0.0.0
^
% Invalid input detected at '^' marker.
*Dec 21 07:46:10.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.9.0.10 peer_port: 5246
*Dec 21 07:46:10.451: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 10.9.0.10 peer_port: 5246
*Dec 21 07:46:10.455: %CAPWAP-5-SENDJOIN: sending Join Request to 10.9.0.10Configure virtual IP Failed: ip admission virtual-ip 0.0.0.0
end
*Dec 21 07:46:10.779: %DOT11-5-EXPECTED_RADIO_RESET: Restarting Radio interface Dot11Radio0 due to the reason code 56
*Dec 21 07:46:10.823: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to down
*Dec 21 07:46:10.831: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Dec 21 07:46:11.419: %DOT11-5-EXPECTED_RADIO_RESET: Restarting Radio interface Dot11Radio1 due to the reason code 56
*Dec 21 07:46:11.427: %DOT11-5-EXPECTED_RADIO_RESET: Restarting Radio interface Dot11Radio0 due to the reason code 10
*Dec 21 07:46:11.467: %CAPWAP-5-JOINEDCONTROLLER: AP has joined controller Wireless Controller
*Dec 21 07:46:11.571: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
*Dec 21 07:46:11.859: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Dec 21 07:46:11.975: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to down
*Dec 21 07:46:11.979: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
*Dec 21 07:46:12.239: %WIDS-6-ENABLED: IDS Signature is loaded and enabled
*Dec 21 07:46:12.571: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
*Dec 21 07:46:12.879: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
*Dec 21 07:46:12.995: %DOT11-6-DFS_SCAN_START: DFS: Scanning frequency 5580 MHz for 60 seconds.
*Dec 21 07:46:12.999: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to up
*Dec 21 07:46:13.007: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to down
*Dec 21 07:46:13.019: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Dec 21 07:46:13.999: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to up
*Dec 21 07:46:14.007: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Dec 21 07:46:14.035: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
*Dec 21 07:46:15.035: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
12-22-2024 12:40 AM
We already reply to your previous post.
The issue is bug in ver 8.5
MHM
12-22-2024 01:15 AM
Changes the WLC firmware. You should also disable AP easy admin
config network ap-easyadmin disable
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide