HI All,
I looking for a EEM script with multiple conditions and if all the conditions are met then need to reload a module in CGR
1.The Cisco CGR ( Running IOS) must be UP for 60 min ( if this is true ) then need to check the second condition.
2.Verify Virtual-WPAN 0 is UP for 30 min.( If the 1 & 2 Condition is met) then check the 3 condition.
3.ping a IP assigned to an interface ( x.x.x.x) and if ping fails need to reload the module in Cisco CGR.
Regards,
Senthil
Looking for some help on the Script.
