Hi
We are from Salesforce.com . We are using MDS9513 Switches.
We want to setup monitoring for the Switches.
We have Centralized Nagios Monitoring Server for other SAN Devices and Servers
We want to know the procedure for using the Nagios Monitoring server to get the alerts related to performance , hardware failure from the SAN Switch.
We want to know the MIB details for NX-OS.
The Switch Version is
oftware
BIOS: version 1.0.10
loader: version N/A
kickstart: version 6.2(11b)
system: version 6.2(11b)
BIOS compile time: 01/08/09
kickstart image file is: bootflash:///m9500-sf2ek9-kickstart-mz.6.2.11b.bin
kickstart compile time: 3/12/2015 15:00:00 [02/27/2015 13:02:47]
system image file is: bootflash:///m9500-sf2ek9-mz.6.2.11b.bin
system compile time: 3/12/2015 15:00:00 [02/27/2015 15:20:13]
Hardware
cisco MDS 9513 (13 Slot) Chassis ("Supervisor/Fabric-2a")
Motorola, 7447A, altivec with 2071288 kB of memory.
Processor Board ID JAF1449DCRM
