04-03-2020 09:13 AM
Hi,
I'm a complete novice to Linux , so this tripped me up for a while.
On one of the intro labs to set up your Linux desktop the 'sudo' command is omitted from the command to get Chrome setup.
This is the lab guide - https://developer.cisco.com/learning/lab/dev-ubuntu/step/7
Section - Install Chrome
Instruction 3 says Download the Google signing key and add it to the apt key-ring. The command needs 'sudo' added to work.
wget https://dl.google.com/linux/linux_signing_key.pub
Thanks all
Solved! Go to Solution.
04-05-2020 11:09 AM
Hi
You can post in the DevNet support WebEx teams room.
https://developer.cisco.com/site/spark-chat/
You can get quick answers from DevNet experts and give errata.
Hope this helps
04-03-2020 03:47 PM
Hi
This is a Cisco Network Services Orchestrator forum, not for the dev-ubuntu lab. I can forward it along though.
04-03-2020 05:38 PM - edited 04-03-2020 05:55 PM
Yep,forward it or tell me where the feedback site is. I don't mind. It just wasn't obvious to me.
04-05-2020 11:09 AM
Hi
You can post in the DevNet support WebEx teams room.
https://developer.cisco.com/site/spark-chat/
You can get quick answers from DevNet experts and give errata.
Hope this helps
04-06-2020 01:49 AM
Thanks OMZ,
Thats the answer I needed.
Mike
04-06-2020 03:30 AM
you welcome Mike :)
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide