06-03-2021 10:15 AM - editado 06-03-2021 10:16 AM
I cannot use third party SFP as I cannot enter the command:
- no errdisable detect cause gbic-invalid
- service unsupported-transceiver
MAULE#show version
Cisco IOS Software, C3900e Software (C3900e-UNIVERSALK9-M), Version 15.1(4)M4, RELEASE SOFTWARE (fc1 )
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Tue 20-Mar-12 22:07 by prod_rel_team
ROM: System Bootstrap, Version 15.1(1r)T5, RELEASE SOFTWARE (fc1)
MAULE uptime is 2 hours, 30 minutes
System returned to ROM by power-on
System restarted at 13:17:07 UTC Thu Jun 3 2021
System image file is "flash1:c3900e-universalk9-mz.SPA.151-4.M4.bin"
Last reload type: Normal Reload
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
Cisco CISCO3925-CHASSIS (revision 1.0) with C3900-SPE200/K9 with 1015808K bytes of memory.
Processor board ID ***
6 Gigabit Ethernet interfaces
1 terminal line
1 Virtual Private Network (VPN) Module
DRAM configuration is 72 bits wide with parity enabled.
256K bytes of non-volatile configuration memory.
1000944K bytes of ATA System CompactFlash 0 (Read/Write)
250880K bytes of ATA CompactFlash 1 (Read/Write)
License Info:
License UDI:
-------------------------------------------------
Device# PID SN
-------------------------------------------------
0 C3900-SPE200/K9 ***
Technology Package License Information for Module:'c3900e'
-----------------------------------------------------------------
Technology Technology-package Technology-package
Current Type Next reboot
------------------------------------------------------------------
ipbase ipbasek9 Permanent ipbasek9
security securityk9 Permanent securityk9
uc uck9 Permanent uck9
data None None None
Configuration register is 0x2102
------------------------------------------------------------------------
MAULE#conf t
Enter configuration commands, one per line. End with CNTL/Z.
MAULE(config)# no errdisable detect cause gbic-invalid
^
% Invalid input detected at '^' marker.
MAULE(config)#service unsupported-transceiver
^
% Invalid input detected at '^' marker.
el 06-03-2021 02:54 PM
Gracias por comunicarte con la comunidad de cisco @emendez1816 actualmente estas en la comunidad de español por lo cual responderemos bajo este idioma, los dispositivos cisco en muchos casos no soportan SFP de tercero y en caso de aceptarlos muchas funciones no se encuentran activas, a continuación te envio el link de compatibilidad, te recomendamos utilizar dipositivos cisco.
Recuerda calificar esta o cualquier otra respuesta de nuestros expertos.
06-04-2021 05:41 AM - editado 06-04-2021 05:45 AM
Hi
What type of SFP are you trying to install? Try with these steps:
configure
service unsupported-transceiver
interface type slot
media-type sfp
speed <value>
shutdown
no shutdown
I hope this works.
Regards
Descubra y salve sus notas favoritas. Vuelva a encontrar las respuestas de los expertos, guías paso a paso, temas recientes y mucho más.
¿Es nuevo por aquí? Empiece con estos tips. Cómo usar la comunidad Guía para nuevos miembros
Navegue y encuentre contenido personalizado de la comunidad