WLAN configuration on 867VAE-W-E-K9

[amaurybecquet3]

Hello everyone !

I have got quite a problem with my WLAN configuration on my 860 series cisco.

It says that it has a flash:c860vaew-advsecurityk9-mz.SPA.155-2.T1.bin so this IOS should not be a problem.

But when i go online and try to find a solution it says that i need to have the Wlan-AP0 interface but i dont have it...

Wlan-GigabitEthernet0 unassigned YES unset up up

When i do a "sh ip int brief" i only have this interface that seem related to wlan but i dont know anything to how i should configure it.

Plus if it's the IOS that makes it not functionnal, as i am not able to download cisco ios because i dont own a cisco service contracti am screwed...

Thanks in advance for your help !

[balaji.bandi]

 if you using CLI you need to connect 2002 port to configure. check this guide  :

https://www.cisco.com/c/en/us/td/docs/routers/access/800/software/configuration/guide/SCG800Guide/SCG800_Guide_BookMap_chapter_01001.html#con_1091886

[amaurybecquet3]

Thank you very much i am going to look into it,

Have a great day