Commande "mls qos trust DSCP" not available on Cisco 2960 LL

[Aimad]

Hi,

I would like to ask you something.

I have 5 switchs Cisco 2960L-8PS-LL running c2960l-universalk9-mz.152-6.E.bin.

For a project, I have to change a port configuration from "trust COS" to "trust DSCP" but the commande "mls qos trust dscp" is not available, only "mls qos trust COS" is available on the switch.

Do you know if I upgrade the switch to 2960l-universalk9-tar.152-7.E0a (version found on Cisco.com)  will resolve the issue ?

I found a link where the information was present but I can not find it anymore.

Thanks for your return.

Best Regards

[luis_cordova]

Hi @Aimad 

Check this link:

https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2960l/software/15-2_6_e/configuration_guide/b_1526e_consolidated_2960l_cg/b_1526e_consolidated_2960l_cg_chapter_010111.html

Regards 

[Aimad]

Hi  @luis_cordova 

Thanks for your return.

I upgraded the switch and command "mls qos trust dscp" is now available.

Many thanks