J'ai une configuration dhcp ipv6 dans mon ancien ASR 1001 et je veux la reconfigurer dans un ASR 1002, mais lorsque j'enregistre la configuration, je constate que certaines commandes manquent.
Voici la configuration DHCP IPV6 dans ASR 1k:
####################################
ipv6 dhcp pool VLAN10-pool2
prefix-delegation pool wan_internet_BT
address prefix 2004:20::/64
address prefix 2004:20::/56 lifetime 315360000 315360000
link-address FE80:1::1/64
dns-server 2001:4860:4860::8888
dns-server 2001:200::10:64:16:4
dns-server 2A01:6E00:10:401::56
domain-name lab.mystrotv.com
sntp address 2001:4::1002
vendor-specific 3561
suboption 1 ascii "http://ssm.val:1111/ACS-INTF"
suboption 234 ascii "TWC"
suboption 23 address 2001:200::10:64:16:4
suboption 24 ascii "home"
and this what I could configure it in the ASR 1002:
ipv6 dhcp pool VLAN10-pool2
prefix-delegation pool wan_internet_BT
dns-server 2001:4860:4860::8888
dns-server 2001:200::10:64:16:4
dns-server 2A01:6E00:10:401::56
domain-name lab.mystrotv.com
Comme vous le voyez ici, je n'ai pas pu configurer la commande prefix-address sous le serveur ipv6 dhcp dans mon ASR 1002 et d'autres nombreuses commandes comme la commande suboption.
Merci de votre aide
Texte d'origine:
I have an ipv6 dhcp configuration in my old ASR 1001 and I want to reconfigure it in ASR 1002 , but when I taped the configuration I found that there is some commands are missed .
this is the IPV6 DHCP configuration in ASR 1k :
(see the configuration above)
As you see here , I couldn't configure the prefix-address command under the ipv6 dhcp server in my ASR 1002 and many other commands like suboption command.
Thanks for your help
