- Marquer comme nouveau
- Marquer
- S'abonner
- Sourdine
- S'abonner au fil RSS
- Surligner
- Imprimer
- Signaler un contenu inapproprié
le 12-01-2023 11:40 AM
Hello,
I am looking for the configuration file XMLDefault.cnf.xml cisco 8945
in order to proceed with the migration to SIP
Thanks for your help
Résolu ! Accéder à la solution.
- Étiquettes:
-
VoIP
Solutions approuvées
- Marquer comme nouveau
- Marquer
- S'abonner
- Sourdine
- S'abonner au fil RSS
- Surligner
- Imprimer
- Signaler un contenu inapproprié
18-04-2023 11:20 PM - modifié 18-04-2023 11:25 PM
Hello @cdricminkala,
Do you always need assitance?
If you are migrating the Cisco 8945 to SIP, you will need to obtain the SIP firmware for the phone from Cisco and upload it to the call control platform that is managing the phone. Once the firmware is uploaded, the phone will download the appropriate configuration files from the call control platform, including the SIP configuration file.
The SIP configuration file for the Cisco 8945 is typically named SIP<mac_address>.cnf.xml, where <mac_address> is the MAC address of the phone in hexadecimal format. This file contains the SIP configuration settings for the phone, including the SIP server address, authentication credentials, and other parameters.
----------------
Le sujet est toujours d'actualité?
Si vous migrez le TIP Cisco 8945 vers SIP, vous devrez obtenir le firmware SIP pour le téléphone auprès de Cisco et le télécharger sur la plate-forme de contrôle des appels qui gère le téléphone. Une fois le firmware téléchargé, le téléphone téléchargera les fichiers de configuration appropriés, y compris le fichier de configuration SIP.
Le fichier de configuration SIP pour le TIP Cisco 8945 est généralement nommé SIP<mac_address>.cnf.xml, où <mac_address> est l'adresse MAC du téléphone au format hexadécimal. Ce fichier contient les paramètres de configuration SIP du téléphone, y compris l'adresse du serveur SIP, les identifiants d'authentification et d'autres paramètres.
.ı|ı.ı|ı. If This Helps, Please Rate .ı|ı.ı|ı.
- Marquer comme nouveau
- Marquer
- S'abonner
- Sourdine
- S'abonner au fil RSS
- Surligner
- Imprimer
- Signaler un contenu inapproprié
le 14-03-2025 06:39 AM
Bonjour,
Je souhaite migrer et l'utilisé avec Freebpx qui est basé sur Asterisk
- Marquer comme nouveau
- Marquer
- S'abonner
- Sourdine
- S'abonner au fil RSS
- Surligner
- Imprimer
- Signaler un contenu inapproprié
18-04-2023 11:20 PM - modifié 18-04-2023 11:25 PM
Hello @cdricminkala,
Do you always need assitance?
If you are migrating the Cisco 8945 to SIP, you will need to obtain the SIP firmware for the phone from Cisco and upload it to the call control platform that is managing the phone. Once the firmware is uploaded, the phone will download the appropriate configuration files from the call control platform, including the SIP configuration file.
The SIP configuration file for the Cisco 8945 is typically named SIP<mac_address>.cnf.xml, where <mac_address> is the MAC address of the phone in hexadecimal format. This file contains the SIP configuration settings for the phone, including the SIP server address, authentication credentials, and other parameters.
----------------
Le sujet est toujours d'actualité?
Si vous migrez le TIP Cisco 8945 vers SIP, vous devrez obtenir le firmware SIP pour le téléphone auprès de Cisco et le télécharger sur la plate-forme de contrôle des appels qui gère le téléphone. Une fois le firmware téléchargé, le téléphone téléchargera les fichiers de configuration appropriés, y compris le fichier de configuration SIP.
Le fichier de configuration SIP pour le TIP Cisco 8945 est généralement nommé SIP<mac_address>.cnf.xml, où <mac_address> est l'adresse MAC du téléphone au format hexadécimal. Ce fichier contient les paramètres de configuration SIP du téléphone, y compris l'adresse du serveur SIP, les identifiants d'authentification et d'autres paramètres.
.ı|ı.ı|ı. If This Helps, Please Rate .ı|ı.ı|ı.
- Marquer comme nouveau
- Marquer
- S'abonner
- Sourdine
- S'abonner au fil RSS
- Surligner
- Imprimer
- Signaler un contenu inapproprié
le 14-03-2025 05:30 AM
Bonjour j'ai le MAC-ADDRESS du téléphone mais comment l'enregistré Merci
- Marquer comme nouveau
- Marquer
- S'abonner
- Sourdine
- S'abonner au fil RSS
- Surligner
- Imprimer
- Signaler un contenu inapproprié
le 14-03-2025 06:22 AM
Bonjour @dd77
l'enregistré sur quoi ? CME ? CUCM ? Webex ?
Pourriez-vous décrire votre contexte s'il vous plait.
.ı|ı.ı|ı. If This Helps, Please Rate .ı|ı.ı|ı.
- Marquer comme nouveau
- Marquer
- S'abonner
- Sourdine
- S'abonner au fil RSS
- Surligner
- Imprimer
- Signaler un contenu inapproprié
le 14-03-2025 06:39 AM
Bonjour,
Je souhaite migrer et l'utilisé avec Freebpx qui est basé sur Asterisk
- Marquer comme nouveau
- Marquer
- S'abonner
- Sourdine
- S'abonner au fil RSS
- Surligner
- Imprimer
- Signaler un contenu inapproprié
le 14-03-2025 08:07 AM
Le 8945 est en SCCP actuellement ?
Dans l'affirmative déjà il faut mettre le firmware à jour via TFTP. Placer les fichiers du firmware dans le dossier TFTP "/tftpboot/" et configurer un fichier XMLDefault.cnf.xml pour indiquer le firmware SIP.
.ı|ı.ı|ı. If This Helps, Please Rate .ı|ı.ı|ı.
