le 29-12-2022 11:50 PM
Hello,
we have established a Trunk link between Cisco CUCM v12.5 and an Alcatel OmniPCx.
however we have a problem getting along on SIP trunk calls between Cisco CUCM v12.5 and Alcatel OmniPCx.
Telephones of the CP-8865 type work correctly but those of the CP-3905, CP8841, SPA514 type work randomly.
Need support, please.
le 24-04-2023 01:55 AM
Hello @Hashen,
do you always need assistance for your request ?
Thanks.
le 01-05-2023 03:48 PM
yes.
01-05-2023 10:56 PM - modifié 01-05-2023 10:57 PM
Hello @Hashen,
Check the SIP configuration settings on both systems, including the codecs supported and the transport protocol used for SIP signaling. Make sure the settings are compatible between the two systems.
It's possible that the CP-8865 phones are simply better suited for use with the Cisco CUCM and the SIP trunk configuration you have set up. The CP-8865 is a newer and more advanced model compared to the CP-3905 and SPA514 phones, and it may have better compatibility with SIP trunking and other advanced features.
It's important to investigate the specific error messages and logs related to the SIP trunk calls to identify the root cause of the issue and determine the best course of action to resolve it.
La communauté est un hub pour vous connecter avec vos pairs et les spécialistes Cisco, pour demander de l'aide, partager votre expertise, développer votre réseau et évoluer professionnellement.
Vous êtes un nouvel arrivant ? Cliquez ici pour en savoir plus.
Nous voulons que votre navigation soit la meilleure, donc vous trouverez des liens pour vous aider à être rapidement familiarisé avec la Communauté Cisco :
Parcourez les liens directs de la Communauté et profitez de contenus personnalisés en français