Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,I had an infrastructure with a Nexus 9k3 at the core level. We recently decided to make a core in HA (a second Nexus was added) in VPC. At the access layer level, they are C9200. The DHCP server is on another device so an IP dhcp relay is con...
We configured our C9800 with a Dot1x SSID.
when clients enter access to connect, we have the following message
Mar 7 14:11:37.180: %DOT1X-5-FAIL: Chassis 1 R0/0: wncd: Authentication failed for client (f446.3742.4aa0) with reason (Cred Fail) on Inter...
Hello,we have established a Trunk link between Cisco CUCM v12.5 and an Alcatel OmniPCx.however we have a problem getting along on SIP trunk calls between Cisco CUCM v12.5 and Alcatel OmniPCx.Telephones of the CP-8865 type work correctly but those of...
Hello everyone, @Enes Simnica @paul driver @MHM Cisco World
I have noted your observation. However the result remains the same (Unfortunately, I lost the debug).However I recently read somewhere that the HSRP VIP has several limitations including th...
I had added it, that was the configurationvpc domain 100peer-switchrole priority 1system-priority 1peer-keepalive destination 10.1.1.2 source 10.1.1.1 vrf vpc-keepalivepeer-gatewaylayer3 peer-routerauto-recoveryip arp synchronizedelay restore 3
It di...
Hi @Enes Simnica
thanks for your contribution.i will check the debug commands and give you a feedback.
ip arp syncho is already configured.
at the HSRP configuration level, here is the following:
NEXUS 1
interface Vlan141description "STOR"no shutdow...
