01-05-2021 04:15 AM
Hi,
It is possible in ISE to allow a particular group to enter configuration mode but can only do the shutdown and no shutdown? What could be the possible argument for such.
Thanks!
Solved! Go to Solution.
01-05-2021 08:21 PM
Hi
You can create 2 command set that you will assign based on a AD group.
In the specific command set, you will allow conf t, interface command and shut/no shut.
Is that clear? I could try to do some screenshots with existing ise if needed.
01-05-2021 08:21 PM
Hi
You can create 2 command set that you will assign based on a AD group.
In the specific command set, you will allow conf t, interface command and shut/no shut.
Is that clear? I could try to do some screenshots with existing ise if needed.
01-15-2021 07:33 PM
Hi,
This is great! Thank you!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide