Steven,

They may not to give you the running-config, us network switch guys a protective like that , but they could also give you the output of this command..... Show Interface Status

and here is what you would get

Gi2/1     Desktop_Phone      notconnect   109          auto   auto 10/100/1000-TX
Gi2/2     Desktop_Phone      connected    109        a-full a-1000 10/100/1000-TX
Gi2/3     Desktop_Phone      connected    109        a-full a-1000 10/100/1000-TX
Gi2/4     Desktop_Phone      connected    109        a-full a-1000 10/100/1000-TX
Gi2/5     Desktop_Phone      connected    109        a-full a-1000 10/100/1000-TX
Gi2/6     Desktop_Phone      connected    109        a-full a-1000 10/100/1000-TX
Gi2/7     Desktop_Phone      connected    109        a-full a-1000 10/100/1000-TX
Gi2/8     Desktop_Phone      connected    109        a-full a-1000 10/100/1000-TX
Gi2/9     Desktop_Phone      connected    109        a-full a-1000 10/100/1000-TX
Gi2/10    Desktop_Phone      connected    109        a-full  a-100 10/100/1000-TX
Gi2/11    Desktop_Phone      connected    109        a-full a-1000 10/100/1000-TX
Gi2/12    Desktop_Phone      connected    109        a-full a-1000 10/100/1000-TX
Gi2/13    Desktop_Phone      notconnect   109          auto   auto 10/100/1000-TX
Gi2/14    Desktop_Phone      connected    109        a-full a-1000 10/100/1000-TX
Gi2/15    Desktop_Phone      notconnect   109          auto   auto 10/100/1000-TX
Gi2/16    Desktop_Phone      notconnect   109          auto   auto 10/100/1000-TX
Gi2/17    Desktop_Phone      notconnect   109          auto   auto 10/100/1000-TX
Gi2/18    Desktop_Phone      notconnect   109          auto   auto 10/100/1000-TX
Gi2/19    Desktop_Phone      notconnect   109          auto   auto 10/100/1000-TX
Gi2/20    Desktop_Phone      notconnect   109          auto   auto 10/100/1000-TX

I think that would give you what you needed

Mike