Hola,
Alguien podria ayudarme tengo problemas para establecer la conexión 3G, aparece como inactiva. Me indicaron que no hay que autenticar user ni password por que no lo pedira, solo se necesitaria:
Dial Number *99***1#
APN Code: datacard.nextel.com.pe
Config:
--------
chat-script internet "" "ATDT*99*2#" TIMEOUT 30 "CONNECT"
!
!
vtp mode transparent
!
!
!
archive
log config
hidekeys
!
!
controller DSL 0
line-term cpe
!
vlan 2
!
!
!
!
interface FastEthernet0
no keepalive
!
interface FastEthernet1
!
interface FastEthernet2
!
interface FastEthernet3
!
interface wlan-ap0
description Service module interface to manage the embedded AP
no ip address
arp timeout 0
!
interface Wlan-GigabitEthernet0
description Internal switch interface connecting to the embedded AP
!
interface Cellular0
ip address negotiated
ip virtual-reassembly
encapsulation ppp
dialer in-band
dialer-group 2
async mode interactive
!
interface Vlan1
ip address 172.168.1.1 255.255.255.0
!
interface Dialer2
ip address negotiated
encapsulation ppp
dialer pool 2
dialer idle-timeout 0
dialer string internet
dialer persistent
dialer-group 2
!
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 Cellular0
no ip http server
no ip http secure-server
!
!
!
access-list 2 permit any
dialer-list 2 protocol ip list 2
!
!
!
!
!
control-plane
!
!
line con 0
no modem enable
line aux 0
line 2
no activation-character
no exec
transport preferred none
transport input all
line 3
script dialer internet
no exec
transport input telnet
line vty 0 4
login
!
Profile 2 = INACTIVE
--------
PDP Type = IPv4
Access Point Name (APN) = datacard.nextel.com.pe
Authentication = None
Username: , Password:
* - Default profile
Router#
Router#show cellular 0 radio
Current Band = WCDMA 1900, Channel Number = 487
Current RSSI = -90 dBm
Band Selected = Auto
Number of nearby cells = 1
Cell 1
Primary Scrambling Code = 0x84
RSCP = -92 dBm, ECIO = -8 dBm
Router#show cellular 0 security
Card Holder Verification (CHV1) = Disabled
SIM Status = OK
SIM User Operation Required = None
Number of Retries remaining = 3
Router#
Saludos,
Ricardo
