02-07-2011 12:22 PM - edited 03-11-2019 12:46 PM
Hi everybody,
I have problem to setup my server to use second ISP connection that is not use as a default route.
the topology is:
I have server in Ethernet 3 in my ASA55020 firewall. IP is 172.16.1.2 GW 172.16.1.1(firewall). My firewall default route is ISP1, it is tracking route if it fail firewall should use the ISP2 for default route. Now, I'd need to use ISP2 to route only my server (172.16.1.2) to the world. also I need a static Nat from ISP2 to my server. by the way I have only this server in my network 172.16.1.X no other IP's or hosts.
Please any idea?
Thanks in advance.
Mike
02-07-2011 12:34 PM
On the ASA you can only have one active default gateway. You can route through ISP2 only if you have static routes to know destinations.
I hope this helps.
02-07-2011 12:42 PM
Thanks for your fast reply,
I know this, but I don't have a specific destination, I read there is some tricky configuration that do this, but I didn't understand it. it is static Nat with destination.
Thanks
Mike
02-07-2011 12:53 PM
can you provide a link to that tricky configuration you mentioned?
02-07-2011 01:10 PM
Sure, here you go (last post)
http://www.experts-exchange.com/Hardware/Networking_Hardware/Firewalls/Q_23693536.html
02-07-2011 01:18 PM
unfortunately I can't view the answers from that site. I have a user but probably only with guest rights.
02-07-2011 01:25 PM
use cached page in google
02-07-2011 01:29 PM
got it.
I was able to view the example but I haven't tested it. I might be able to set up a lab and reply to you later on or maybe tomorrow.
02-07-2011 06:15 PM
Mike,
Have you seen this document? https://supportforums.cisco.com/docs/DOC-13015
It is based on the assumption that you have a router in front of your firewall. You can then configure PBR on this router.
02-07-2011 09:11 PM
seab, idont have router!
02-07-2011 09:12 PM
Sean,
Sorry for misspell your name it was from my phone
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide