I received a new ASA 5506-X that I successfully deployed in my network by following session "ASA9.7 and later" of the quick start guide (https://www.cisco.com/c/en/us/td/docs/security/asa/quick_start/5506X/5506x-quick-start.html).
I then tried to do startup wizard in ASDM. I kept all default setting and I chose to enable the DHCP range from 192.168.1.65 to 120. However I got error message and could not complete startup wizard.
I don't understand why the startup wizard failed on a brand new firewall. It seems something is wrong with inside network which remind me that I didn't see inside interface in the list when completing step 4 of the startup wizard, and I saw "no ip address" assigned to inside interface in the home page of ASDM.
I did see, in running-config, there is a BVI interface whose ip address is 192.168.1.1 255.255.255.0.
I would appreciate if someone can help me to fix this issue. Below is the running-config for your reference.
Serial Number:
: Hardware: ASA5506, 4096 MB RAM, CPU Atom C2000 series 1250 MHz, 1 CPU (4 cores)
:
ASA Version 9.8(2)
!
hostname ciscoasa
enable password
names
!
interface GigabitEthernet1/1
nameif outside
security-level 0
ip address dhcp setroute
!
interface GigabitEthernet1/2
bridge-group 1
nameif inside_1
security-level 100
!
interface GigabitEthernet1/3
bridge-group 1
nameif inside_2
security-level 100
!
interface GigabitEthernet1/4
bridge-group 1
nameif inside_3
security-level 100
!
interface GigabitEthernet1/5
bridge-group 1
nameif inside_4
security-level 100
!
interface GigabitEthernet1/6
bridge-group 1
nameif inside_5
security-level 100
!
interface GigabitEthernet1/7
bridge-group 1
nameif inside_6
security-level 100
!
interface GigabitEthernet1/8
bridge-group 1
nameif inside_7
security-level 100
!
interface Management1/1
management-only
no nameif
no security-level
no ip address
!
interface BVI1
nameif inside
security-level 100
ip address 192.168.1.1 255.255.255.0
!
ftp mode passive
same-security-traffic permit inter-interface
object network obj_any1
subnet 0.0.0.0 0.0.0.0
object network obj_any2
subnet 0.0.0.0 0.0.0.0
object network obj_any3
subnet 0.0.0.0 0.0.0.0
object network obj_any4
subnet 0.0.0.0 0.0.0.0
object network obj_any5
subnet 0.0.0.0 0.0.0.0
object network obj_any6
subnet 0.0.0.0 0.0.0.0
object network obj_any7
subnet 0.0.0.0 0.0.0.0
pager lines 24
logging enable
logging asdm informational
mtu outside 1500
mtu inside_1 1500
mtu inside_2 1500
mtu inside_3 1500
mtu inside_4 1500
mtu inside_5 1500
mtu inside_6 1500
mtu inside_7 1500
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
arp rate-limit 16384
!
object network obj_any1
nat (inside_1,outside) dynamic interface
object network obj_any2
nat (inside_2,outside) dynamic interface
object network obj_any3
nat (inside_3,outside) dynamic interface
object network obj_any4
nat (inside_4,outside) dynamic interface
object network obj_any5
nat (inside_5,outside) dynamic interface
object network obj_any6
nat (inside_6,outside) dynamic interface
object network obj_any7
nat (inside_7,outside) dynamic interface
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 sctp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
timeout conn-holddown 0:00:15
timeout igp stale-route 0:01:10
user-identity default-domain LOCAL
aaa authentication login-history
http server enable
http 192.168.1.0 255.255.255.0 inside_1
http 192.168.1.0 255.255.255.0 inside_2
http 192.168.1.0 255.255.255.0 inside_3
http 192.168.1.0 255.255.255.0 inside_4
http 192.168.1.0 255.255.255.0 inside_5
http 192.168.1.0 255.255.255.0 inside_6
http 192.168.1.0 255.255.255.0 inside_7
no snmp-server location
no snmp-server contact
service sw-reset-button
crypto ipsec security-association pmtu-aging infinite
crypto ca trustpool policy
telnet timeout 5
ssh stricthostkeycheck
ssh timeout 5
ssh key-exchange group dh-group1-sha1
console timeout 0
dhcpd auto_config outside
!
dhcpd address 192.168.1.5-192.168.1.254 inside
dhcpd enable inside
!
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
dynamic-access-policy-record DfltAccessPolicy
!
!
prompt hostname context
call-home reporting anonymous prompt 1
Cryptochecksum:0e184a4686d7ab5c177ae22921d08afa
: end
