ASA 5510 Static Route Metrics

[TomServo6]

Hello Cisco Support Forums!

I have a "simple" question regarding static routing on an ASA 5510 and metrics. I just want to confirm that if I add the following configuration that the Route 1 will take precedence over Route 2 due to the metric value being lower.

Route 1:

route outside 0.0.0.0 0.0.0.0 1.1.1.1 1

Route 2:

route outside 0.0.0.0 0.0.0.0 1.1.1.2 2

Any clarifity is much appreciated!

Thanks.

[Richard Burts · Accepted solution]

Yes route 1 will take precedence over route 2.

HTH

Rick

[TomServo6]

All I needed, thanks Rick!

[Richard Burts]

You are very welcome. Thank you for using the rating system to mark this question as answered.

HTH

Rick