cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
506
Views
0
Helpful
3
Replies

ASA 5510

jmcneal
Level 1
Level 1

Hello all. I am totally stuck and need some help. I have an ASA 5510 and i had a static inside,outside statment that i needed to change. Actually had to change the ip address of the inside box. I have made the change and know I or the vendor can access the box. I can ping it from the firewall and all access rules are the change except for the change of the ip address. If I look at the xlate it is all pointed in the write direction. Could someone help?

3 Replies 3

Jon Marshall
Hall of Fame
Hall of Fame

Jeffrey

Could you post the running config of the ASA together with the IP address of the box on the inside.

Jon

In addition to the information requested by Jon, the output of 'show xlate debug' will also help us troubleshoot this issue.

-Mike

Hello everyone we just got it fixed today. Issue was with wrong gateway on the device.

Review Cisco Networking for a $25 gift card