12-09-2014 05:02 AM - edited 03-11-2019 10:12 PM
I have ASA5525-X and I can't save configuration because of flash memory doesn't let me. I tried to format from rommon but results are same. Is there someone who can help me to fix a problem?
12-09-2014 05:18 AM
Hi,
Can you update with these outputs:-
1) show disk0:
2) fsck disk0:
3) error which you get while writing the configuration on the ASA device.
Thanks and Regards,
Vibhor Amrodia
12-09-2014 10:56 PM
All outputs are below:
asa01# show disk0:
--#-- --length-- -----date/time------ path
41 34523136 Oct 19 2013 19:29:18 asa861-2-smp-k8.bin
42 17851400 Oct 19 2013 19:52:00 asdm-66114.bin
43 42637312 Oct 19 2013 19:53:10 IPS-SSP_5525-K9-sys-1.1-a-7.1-4-E4.aip
44 12998641 Oct 19 2013 20:01:08 csd_3.5.2008-k9.pkg
45 4678691 Oct 19 2013 20:01:42 anyconnect-win-2.5.2014-k9.pkg
46 6487517 Oct 19 2013 20:02:14 anyconnect-macosx-i386-2.5.2014-k9.pkg
47 6689498 Oct 19 2013 20:02:32 anyconnect-linux-2.5.2014-k9.pkg
2 4096 Oct 19 2013 20:07:36 log
5 4096 Oct 19 2013 20:07:50 crypto_archive
48 0 Oct 19 2013 20:07:52 nat_ident_migrate
16 4096 Oct 19 2013 20:07:52 coredumpinfo
17 59 Oct 19 2013 20:07:52 coredumpinfo/coredump.cfg
49 3567 Oct 20 2013 14:23:24 startup-config
50 4096 Oct 20 2013 14:22:46 syslog
58 0 Oct 20 2013 14:22:46 syslog/LOG-2013-10-20-092247.TXT
51 8192 Jan 01 1980 04:00:00 FSCK0000.REC
52 4096 Jan 01 1980 04:00:00 FSCK0001.REC
53 8192 Jan 01 1980 04:00:00 FSCK0002.REC
54 100 Feb 10 2014 18:50:20 upgrade_startup_errors_201402101450.log
14 4096 Feb 14 2014 16:04:58 snmp
15 4 May 27 2014 15:43:24 snmp/single_vf
55 4096 May 27 2014 16:43:06 tmp
7994621952 bytes total (3868913664 bytes free)
===========================================================================
asa01# fsck disk0:
umount: can't umount /mnt/disk0: Device or resource busy
Write 7807256 bytes at 7823872:Operation not permitted
dosfsck 2.11, 12 Mar 2005, FAT32, LFN
FATs differ but appear to be intact. Using first FAT.
mount: mounting /dev/sdb1 on /mnt/disk0 failed: Device or resource busy
fsck of disk0: complete
WARNING: Restoring security context mode failed.
===========================================================================
asa01# wr
Building configuration...
Cryptochecksum: 80f04b34 4ca2081b b8bfe88a 5b57e6e7
%Error opening disk0:/.private/startup-config (Read-only file system)
Error executing command
[FAILED]
12-11-2014 02:40 AM
Hi,
Can you Shutdown the IPS module running on the ASA device and then try to check again.
Thanks and Regards,
Vibhor Amrodia
12-11-2014 11:26 PM
Hi,
Shut-downing didn't help
asa01# sw-module module ips shutdown
Shutdown module ips? [confirm]
Shutdown issued for module ips.
asa01# show module ips details
Getting details from the Service Module, please wait...
Unable to read details from module ips
Card Type: Unknown
Model: N/A
Hardware version: N/A
Serial Number: FCH1650JMQT
Firmware version: N/A
Software version:
MAC Address Range: 4403.a74a.0714 to 4403.a74a.0714
Data Plane Status: Not Applicable
Status: Down
License: IPS Module Enabled perpetual
asa01# wr
Building configuration...
Cryptochecksum: e2cfe3c1 9e89beea 25e7d821 e172d1b0
%Error opening disk0:/.private/startup-config (Read-only file system)
Error executing command
[FAILED]
12-12-2014 01:38 AM
Hi,
So , did you try to fsck the disk after shutting down the module ?
It seems that we should try to format the Disk as the last resort after that.
Thanks and Regards,
Vibhor Amrodia
12-12-2014 04:40 AM
Results were same
asa01# fsck disk0:
open /dev/sdb1:Read-only file system
dosfsck 2.11, 12 Mar 2005, FAT32, LFN
fsck of disk0: complete
WARNING: Restoring security context mode failed.
asa01# format disk0:
WARNING: There are one or more sw-module disk images present on disk0:. If you continue with this operation all the data on those disk images will be destroyed.
Proceed with operation? {confirm]
Format operation may take a while. Continue? [confirm]
Format operation will destroy all data in "disk0:". Continue? [confirm]
Initializing partition - done!
Creating FAT32 filesystem
mkdosfs: unable to open /dev/sdb1
mkdosfs 2.11 (12 Mar 2005)
System tables written to disk
Format of disk0 complete
WARNING: Restoring security context mode failed.
asa01#
asa01#
asa01#
asa01# wr
Building configuration...
Cryptochecksum: e2cfe3c1 9e89beea 25e7d821 e172d1b0
%Error opening disk0:/.private/startup-config (Read-only file system)
Error executing command
[FAILED]
asa01#
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: