ASA 5555x error type 2 severity 80 class 1 subclass 1 operation 3

[slavadww]

Hello! prompt Cisco ASA 5555x at loading produces an error "error type 2 severity 80 class 1 subclass 1 operation 3"
Then it reboots "ERROR - failed LINA IO open
Panic: Environment Monitor process -Error opening IPMI driver: ipmi0 "
and so on the cycle

[Heath Mulder]

Hi , Have you already solved this issue ?

We have a ASA5515-FPWR-K9 that suddenly is in a boot loop , i tried booting image from ROMMON and the unit just stops booting with the same message as you mention : 

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Received 86704128 bytes

Launching TFTP Image...

Execute image at 0x14000
Cisco Security Appliance admin loader (3.0) #0: Fri Mar 18 14:05:27 PDT 2016
Platform ASA5515

Loading...
IO memory blocks requested from bigphys 32bit: 41235
INIT: version 2.88 booting
Starting udev
Configuring network interfaces... done.
Populating dev cache
dosfsck 2.11, 12 Mar 2005, FAT32, LFN
There are differences between boot sector and its backup.
Differences: (offset:original/backup)
65:01/00
Not automatically fixing this.
Starting check/repair pass.
Starting verification pass.
/dev/sdb1: 152 files, 889565/2011280 clusters
dosfsck(/dev/sdb1) returned 0
Could not open dDeconfiguring network interfaces... done.
Sending all processes the TERM signal...
Sending all processes the KILL signal...
Deactivating swap...
Unmounting local filesystems...
▒ff▒ERROR: Type:2; Severity:80; Class:1; Subclass:1; Operation: 3

<<<<here it starts booting again and end up in the rommon again>>>>

Cisco BIOS Version:9B2C112A
Build Date:10/26/2016 12:21:39

CPU Type: Intel(R) Core(TM) i3 CPU 540 @ 3.07GHz, 3059 MHz
Total Memory:8192 MB(DDR3 1333)
System memory:619 KB, Extended Memory:3573 MB