Hi Can any one help me to implement Below scenario :
I am having ASA 5508X box with firepower, I have connected interface Gi1/1 to MGMT PC for ASDM access interface Gi1/4 with interface MGMT1/1 for Firepower connectivity and interface Gi1/1 and Gi1/4 are in bridge-group 1. Below are the interface configuration:
GigabitEthernet1/1
nameifameif outside
security-level 0
bridge-group 1
------------------------------------------------
GigabitEthernet1/4
nameif outside1
security-level 0
bridge-group 1
-------------------------------------------------
managment1/1
no nameif
no security-level
--------------------------------------------------
interface bvi 1
security-level 0
ip address 10.222.0.5 255.255.255.0
-------------------------------------------------
Firepower management ip 10.222.0.6 255.255.255.0
Firepower Default-Gateway- 10.222.0.5
--------------------------------------------------
ASA is in router mode
--------------------------------------------------
with the above configuration and MGMT ip 10.222.0.5 i am able to access firewall using ASDM but not able to access Firepower in ASDM. Now, My question is :
i- can we achive above scenario without using an L2 switch?
ii- Does this scenario can be only achived in transparent mode?
