hi,
I have a cisco ASA 5525, and I need to establish a vpn site to site.
It establishes phase 1 without problems, but for phase 2 they ask me to use a Public IP for the encryption domain, however that ASA does not have a direct connection to the Internet.
Is there any way to "cheat", with loopback or nat?
The internal server has an internal IP (belongs to an ASA interface -> dmz_3)
Interface Name Security
GigabitEthernet0 / 0 Outside 0
GigabitEthernet0 / 1 Inside 100
GigabitEthernet0 / 2 dmz 50
GigabitEthernet0 / 3 dmz_2 55
GigabitEthernet0 / 4 dmz_3 55
TNKs!