cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
41489
Views
0
Helpful
31
Replies

ASA url logging

scottwilliamson
Level 5
Level 5

Hi,

I'm attempting to make our ASA log urls and I am getting some success. However, the output presents the IP instead of the actual domain, e.g, when browsing to imdb it is logged as:

Nov 16 2009 14:12:35: %ASA-5-304001: 30.30.30.30 Accessed URL 209.85.229.148:/ad

j/imdb2.consumer.homepage/;tile=2;sz=468x60,728x90,1008x150,9x1;p=t;s=32;;ord=99

73051011677648

rather than imdb.com/....(or whatever it happens to be).

How do I get the ASA to log the domain rather than the corresponding IP address?

http://www.cisco.com/en/US/products/ps6128/products_configuration_example09186a0080ac2fda.shtml#related

states the ASA has to run vers 8.0.4.24 or later, ours has 8.2(1).

Thanks,

Scott

31 Replies 31

scottwilliamson
Level 5
Level 5

Hi All,

I finally got around to trying this again and I can confirm that with v8.2(3) and using the regex config from Roderick above my ASA is now logging what appears to be the full urls of sites. I didn't have to do anything with DNS either.

Thanks for everyone's input.

Regards,

Scott

tstrosnider
Community Member
You do not need the regex, you can use the following command logging message 304001
Review Cisco Networking for a $25 gift card