ASA5520 Error message "vPif_isVpifNumValid: pifNum out of range!"

[gert.schaarup]

Hello.

When trying to access the asa (8.0(3)) with asdm the console send follwing error message:

vPif_isVpifNumValid: pifNum out of range!

vPif_getVpif: bad vPifNum(0xa6) from 87EBC81 from 83833B4

Have a strong suspicion that it is a hardware failure (since asdm has worked and have tried to restart the box)

can not see any errors with any show commands, but could it be a RAM error (anyone who have similar experience and can confirm ?).

[mwinnett]

Messages are due to SNMP polling. Might be worth locating and stopping the NMS station that is polling the ASA to confirm. I don't find any defects for this fixed since early 8.0. Might be worth going to 8.0.5 and seeing if issue persists

http://www.cisco.com/cisco/software/release.html?mdfid=279916878&flowid=4374&softwareid=280775065&release=8.4.4.1.ED&relind=AVAILABLE&rellifecycle=&reltype=latest

Matthew

[yu-jun]

hello:

when trying to access use ssh  to connect the firewall ，my  asa5515x have the same problem ，so do you have good ideas to slove this QA.thx