11-11-2003 04:57 PM - edited 02-20-2020 11:05 PM
hi,
is it posible to configure a pix to allow:
1.-remote access vpn from cisco client 3.x with xauth
and
2.-at the same time allow a lan-to-lan tunnel from another pix (i'm actually asking about a linksys, but if it works with pix it'll do) with a dsl connection with variable ip addressing.
do you have a sample config?
regards,
c.
11-11-2003 05:15 PM
Yes for question one, see:
http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a0080094cea.shtml
For question 2:
You have to combine the policies into one crypto map.
11-11-2003 05:29 PM
i saw the second link, but what confuses me is the fact that:
(here i go with my numbering)
1.-the use of xauth, won't the pix try to xauth the lan2lan connection (i don't want that)
2.-is there a need for the 'set peer' policy within the second policy i would add to the crypto map?
regards (and thanks a lot!)
c.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: