Configuration BVI transparent FW and VLAN´s

[pumita1601]

Hello I have a problem whit the configuration of a Firewall ASA 5585 whit the BVI Interface and transparent Firewall, I have 2 VLAN that i want to interconnect.

this is the scenario.

The problem is whit the configuration of VLAN. The traffic does not cross the FW.

[Andrew Phirsov]

Provide the config and tell what traffic you're talking about.

[Umit AYDINLI]

Hi pumita,

if youre using asa transparent mode, you should set ip address same subnet to the bvi interface.

for example router 192.168.1.1/24 -> l2 switch -> asa 192.168.1.2/24 -> l2 switch -> server 192.168.1.3/24