Configuring bandwidth lmitation per VLAN

[securantakra]

Hi,

we have a ASA5540 configured with up to 25 VLANs. Now we want to limit 10 VLANs with 100 MBit/s for each VLAN. These VLANs are on the same physical link.

How can this be configured? Have anyone doing this before, or have you any documentation with a similar szenario?

[Collin Clark]

AFAIK you can't police and shape with an ASA. You could do it on a layer 3 switch then trunk. Why do you need to limit the bandwidth? Do you want to limit at 100MB?