EVDO with ASA5505?

[Scott Payne]

Hello everyone!

  Is it possible to use an EVDO router with a Cisco ASA 5505 and still build a site 2 site tunnel?  I am having trouble thinking this through. The EVDO does not have a static. Can I still build a tunnel?

I am so cofused since I have never had to use this as a solution.

Thanks,

STP

[Yudong Wu]

Yes, you can, but since you don't have a static IP, the vpn tunnel can only be initiated from this ASA.

[Scott Payne]

what would need to be done on the firewall to make this happen?  i am only used to static ip with t-1 connections.

[Yudong Wu]

Sorry, I might mis-understand your question. So you have a router with EVDO acess to the internet and you would like to setup a vpn tunnel between this router and a ASA.

If this is the case, yes, you can configure IPSec tunnel between ASA and this router. But, since the router don't have static IP, the vpn has to be initiated from router side. You can configure ASA as Easy VPN server. Here is the example.

http://www.cisco.com/en/US/partner/tech/tk583/tk372/technologies_configuration_example09186a0080809222.shtml

If it is a different case, please explain in detail what you are trying to do.

[Scott Payne]

The link you provided takes me to a page that says the document no longer exists. Does anyone have a smaple config that I could look at?

[Yudong Wu]

Here is PDF.