06-03-2008 10:36 AM - edited 03-10-2019 04:08 AM
Hello there,
Does anyone know how to decode/extract the pre-shared keys for the tunnels using either: ASDM 603 or the CLI on PIX 5520?
Please shoot.
Thks.
06-03-2008 11:16 AM
tftp the configuration from the ASA. The keys will be decrypted.
http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a00807f2d37.shtml
06-03-2008 01:08 PM
Thanks man,
Does it work for 8.03, do you know?
06-03-2008 10:19 PM
The easier solution is:
more system:running-config
You can find more detail here:
http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a00807f2d37.shtml
And yes it should work on 8.x, I don't think this has changed.
Regards
Farrukh
06-06-2008 11:47 AM
Thanks Farukh,
much appreciated.
06-06-2008 11:49 AM
Glad I could help :)
Please rate helpful posts, Regards
Farrukh
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide