How do I restrict access to Wireless router (800 series) by mac address

[jonl711]

I hope I'm in the correct area.

I'm trying to deny access to 3 wireless devices to the cisco 800 series wireless router

The MAC address are:

MAC Address    IP address      Device        Name            Parent         State

0014.6caf.410a 192.168.2.26    unknown       -               self           Assoc

9803.d8ba.cd42 192.168.2.41    unknown       -               self           Assoc

a4d1.d205.72e1 192.168.2.25    unknown 

If this cannot be done is it poosible to assign the mac address to an ip address and then denying access to the ip address.

Thanks

Jon

[Julio Carvajal]

Hello Jon,

You should be able to do it either way. Best way would be by IP address so you do not even allow the host to associate with your AP.

Looking for some Networking Assistance? 
Contact me directly at jcarvaja@laguiadelnetworking.com

I will fix your problem ASAP.

Cheers,

Julio Carvajal Segura
http://laguiadelnetworking.com

[Collin Clark]

Kind of. You can create MAC filters so all traffic is blocked.

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a0080c1e40b.shtml