06-14-2012 03:33 AM - edited 03-11-2019 04:18 PM
Hi all,
Wonder if anyone has experience of this and can give some advice/tips.
I have a Failover pair of ASA5550's running ASDM 6.2(5) and ASA 8.2(2). Originally they were setup with 2 context's and an admin context but one of the contexts has now been removed. I would like to now migrate to single mode before I go about patching them to the latest software. If anyone can suggest the best way of achieving this I would be very grateful!!!
Tim
06-18-2012 08:16 AM
Still struggling with this if anyone can help??
06-18-2012 10:01 AM
Hi Tim,
The best way that I can think of is, since you would lose all the config when you switch from multipe mode to single, then first save the configuration of the single context that you have, change it to single and then make changes and paste it in the single mode ASA, that's the best you can do.
Thanks,
Varun Rao
Security Team,
Cisco TAC
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide