I have IDSM-2 in coreswitch with the following details
Gi1/2 -[Coreswitch with IDSM-2]-Gi9/1
Below is configuration in coreswtch , i want to put IDSM-2 in INLINE mode
interface GigabitEthernet1/2
description **** Uplink to Firewall ****
ip address 10.1.2.73 255.255.255.248
ip ospf network point-to-point
standby 1 ip 10.1.2.75
standby 1 priority 110
standby 1 preempt
!
interface GigabitEthernet1/2.11
encapsulation dot1Q 211
ip vrf forwarding VRF11
ip address 10.2.11.73 255.255.255.248
ip ospf network point-to-point
standby 1 ip 10.2.11.75
standby 1 priority 110
standby 1 preempt
!
interface GigabitEthernet1/2.12
description **** Connected to INFRASOFT TECH - VLAN 12 ****
encapsulation dot1Q 212
ip vrf forwarding VRF12
ip address 10.2.12.73 255.255.255.248
ip ospf network point-to-point
standby 1 ip 10.2.12.75
standby 1 priority 110
standby 1 preempt
interface TenGigabitEthernet9/1
description **** Downlink to Distribution ****
ip address 10.1.2.2 255.255.255.252
ip ospf network point-to-point
rmon collection history 62 owner campusmanager buckets 10 interval 300
!
interface TenGigabitEthernet9/1.11
encapsulation dot1Q 311
ip vrf forwarding VRF11
ip address 10.2.11.2 255.255.255.252
|
interface TenGigabitEthernet9/1.12
encapsulation dot1Q 312
ip vrf forwarding VRF12
ip address 10.2.12.2 255.255.255.252
ip ospf network point-to-point
!
i want to pass all the traffic to pass through IDSM-2 module.
