07-04-2006 05:23 AM - edited 02-21-2020 01:01 AM
hello,
The PPPoE client mode works just fine, but what about the PPTP client mode?
Is that supported by IOS? I haven't found any usefull information.
any advice is appreciated.
thx,
Szilard
07-06-2006 08:33 AM
Hello redfsi,
It looks like IOS will only terminate PPTP. It cannot serve as a client or intiate PPTP tunnels. PPTP is a Microsoft protocol and can only be controlled by the Microsoft client.
Hope this helps! If so, please rate.
Thanks,
hemendoz
07-07-2006 02:15 AM
Hi Hemendoz,
Thank you for information.
So, i'm going to switch to PPPoE
Rgs,
Szilard
08-04-2006 01:53 AM
Hi,
Shifting from PPTP to PPPoE, I do not see quite a relevant thing. I guess you would like to shift to L2TP which is jointly created by MS and Cisco Systems.
Also the best would be to shift to IPSec
Regards,
Wilson Samuel
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide