cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
710
Views
0
Helpful
1
Replies

log in FPR1120 from external network

weiliu8322339
Level 1
Level 1

Hi,

 

I am a new for CISCO product. Could give advice how to setup interface for log in manager from external network?

 

For example, on Fortigate or Sophos,  setup port allow 443 or 80, we could connect to console via the assigned port.

 

Brgds

Liu Wei

 

1 Reply 1

Marvin Rhoads
Hall of Fame
Hall of Fame

If the device is running Firepower 6.7 or later you can set it up to allow management via an interface other than the designated default management interface. However it cannot be a data interface. Also, we generally try to avoid this since it exposes your system to a larger number of attack vectors.

If you really want to do it, there is an option to designate an interface "management only" under the advanced interface configuration section.

https://www.cisco.com/c/en/us/td/docs/security/firepower/70/fdm/fptd-fdm-config-guide-700/fptd-fdm-interfaces.html#task_D0C0FB15621B4F49B29CB010F7D6C2D1

 

Review Cisco Networking for a $25 gift card