Loopback NAT at ASA

[#1]

Hello, community

Got the challenge:

We have ASA 5515 (asa962-smp-k8, asdm-762)

                  _____

Inside1 -> | 5515 | -> outside1 (default route)

Inside2 -> |_____| -> outside2

I need that server from Inside1 connect to outside2:443 and get to server at Inside2:443
By the current configuration Inside1 is nated to world via outside1

How should i configure it?

I'm CCNP RS, but it's my first time with ASA.

Thanks in advance!

[Marvin Rhoads]

Is there any reason why you can't allow Inside1 server to talk directly to Inside2 server?

If they are both same security level interfaces then you just permit same-security inter-interface. If either has an input ACL then you need to allow the traffic explicitly in the ACL(s).