NAT and IPSEC

[madedotun]

Hi guys,

Please can someone assist with the following issue. i dont know why only one machine in the 10.10.10.x range passes traffic via the tunnel while the rest does not. I have the following nat policy configured

nat (inside) 1 access-list xxx

global (outside) 1 200.200.200.1-200.200.200.30 netmask 255.255.255.0

access-list xxx permit ip 10.10.10.x 255.255.255.0 50.50.x.x 255.255.0.0

access-list crypto permit ip 200.200.200.0 255.255.255.0 host 50.50.50.5

isakmp nat-traversal 20

sysopt connection permit-vpn

[hadbou]

Refer to the documnet present in the following url which explains configuring IPSEC using NAT:

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a008045a2d2.shtml