08-20-2013 03:29 AM - edited 03-11-2019 07:27 PM
What we want to do is translate ALL destination address from whatever DA is to 200.2.162.130
08-23-2013 10:29 AM
What version ASA are you running?
08-25-2013 04:22 AM
Hi Marius, using code ASA 8.4.
Thanks,
Vijayakumar G
08-25-2013 11:48 AM
Hello Vijay,
You can do it with no problem at all, the restriction with NAT on transparent mode is : You cannot NAT the traffic to any of the Interfaces of the ASA.
So just do a NAT as you would normally do
object network Outside_IP
host 200.2.162.130
exit
nat (inside,outside) source dynamic any Outside_IP
That´s it!!
Check my blog at http:laguiadelnetworking.com and subscribe so you can get daily information about networking.
Cheers,
Julio Carvajal Segura
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide