NAT rules

[Aknab Aknab]

Hi Guys,

I have 2 interface on ASA inside and outside using nat to hide outside IP from inside users.

inside : 1.3.3.0/24 subnet for users

outside : 8.1.1.0/24 dmz server

I created nat and users able to access file server in dmz.

Is it possible for users to access the real server IP even have nat rules?

[fb_webuser]

it depends what you want to achieve.

From the internet, you need the public IP-adres, from the inside the private IP must be used.

Make sure the ACL and NAT from inside to DMZ must be right.

---

Posted by WebUser Erik Boss from Cisco Support Community App