PIX 506e - cannot browse startup.html

[pietasterkid]

I just got a PIX 506e from a friend that was not longer using it. I'm trying to get started with the configuration page. I've reset it to factory defaults, rebooted and connected up ethernet. I can ping the device at 192.168.1.1 and access it via console. I browse the site https://192.168.1.1/startup.html, get the invalid ssl certification, get a login prompt (user/pass) and as the document says I leave it blank. As soon as I hit ok it goes to the 404 error Page Not found.

Thanks in advance!

second part, anyone have a good article/document on standard configurations via cli? I worked my way through

http://www.dslreports.com/faq/15785 but didn't have any luck. Thats why I want to start with the web config then work into CLI.

[jocamare]

Can you confirm that the PDM/ASDM file is installed in flash?

What's the code version that is installed on the unit?

[pietasterkid]

I meant to reply sorry.

I found out that its 6.3 but that the previous owner removed PDM. I found the download on cisco HOWEVER I don't have an account so I have no way of actually downloading the PDM or 6.3 with pdm bin file.

do you know where I can get that?

thanks

[jocamare]

Legally? Only from Cisco.

You can ask somebody with an account to download it for you or check your company's file storage server.

[pietasterkid]

thanks! I figured that was the case. Too bad they don't provide free downloads to these EOL devices.