Hello,
I desperately need help & advise on this.
I work for a Cisco Partner and I am in the midst of learning PIX & ASA firewall.
I have purchased a PIX 515 myself & the company are ready to hand me over another one for a month which is identical as I have been told.
The question is I need to upgrade the firewall ( hardware and software license )
So accuring the hardware is not at all a problem as we have them in stock in the warehouse but the question is about the license.
I have been told that even if I upgrade the hardware I cannot change the license....I will need to call Cisco for some keys.
Does Cisco provide any keys for training purpose or will I have to pay for the training license ??
Does it help we are Cisco Partners ?
Thank you all in advance for you help.
***************************************
Cisco PIX Firewall Version 6.3(4)
Cisco PIX Device Manager Version 3.0(2)
Compiled on Fri 02-Jul-04 00:07 by morlee
Hardware: PIX-515E, 32 MB RAM, CPU Pentium II 433 MHz
Flash E28F128J3 @ 0x300, 16MB
BIOS Flash AM29F400B @ 0xfffd8000, 32KB
0: ethernet0: address is 0012.daf1.4f6c, irq 10
1: ethernet1: address is 0012.daf1.4f6d, irq 11
2: ethernet2: address is 000e.0c69.d8d7, irq 11
Licensed Features:
Failover: Disabled
VPN-DES: Enabled
VPN-3DES-AES: Disabled
Maximum Physical Interfaces: 3
Maximum Interfaces: 5
Cut-through Proxy: Enabled
Guards: Enabled
URL-filtering: Enabled
Inside Hosts: Unlimited
Throughput: Unlimited
IKE peers: Unlimited
This PIX has a Restricted (R) license.
***************************************