cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
254
Views
0
Helpful
1
Replies

post ASA 8.4 Command

saroj pradhan
Level 1
Level 1

Hi  Team,

 

i have  upgraded  my  Cisco  ASA 5510  firewall  IOS  8.2  to  8.4  .The   command  lines  are  different  from  pre 8.4.

please  help  me  to  have  a  command  of   Nat (dmz) 0  122.168.191.76 255.255.255.252 in   ASA  8.4 IOS.

 

Regards,

Saroj

1 Reply 1

Vibhor Amrodia
Cisco Employee
Cisco Employee

Hi,

This is an identity NAT statement on the ASA device. Normally , if you don't have a NAT statement on the ASA device , it works like identity NAT statement itself.

SO , i don't think you would require this until and unless you have another NAT statement on the ASA device for this "dmz" interface.

Thanks and Regards,

Vibhor Amrodia

Review Cisco Networking for a $25 gift card