cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
558
Views
0
Helpful
3
Replies

problem with accessing a website on the dmz from internal

fwilliams-iumg
Level 1
Level 1

i get a syslog message  "deny tcp (no connection) from 173.46.173.5/16220 to HGREAK_GLB/443 flags RST  on interface outside" when I am trying to access a website that is on my DMZ from internal.  The browser displays "cannot display the webpage".  Please help

3 Replies 3

Julio Carvajal
VIP Alumni
VIP Alumni

Hello Frank,

So you are attempting to access the website on the DMZ from an internal network,

Are you using a public DNS on the outside or an internal DNS?

Can you do the following and give it a try?

static (dmz,inside) HGREAK_GLB(ipadd)  HGREAK_GLB(ipadd)

Regards,

Julio

Julio Carvajal
Senior Network Security and Core Specialist
CCIE #42930, 2xCCNP, JNCIP-SEC

Thanks jcarvaja for your response.  It turns out that a change to our Websense platform was causing this error.  We have the correct static/nat config but a change was made and Websense did not work correctly in the sense it did not show a blocked page but when the changes were backed out, all was right with the world again.

Hello Frank,

Great to hear that everything is working now, Please mark the question as answered so future users can check this discussion as a reference on their problems.

Regards,

Julio

Julio Carvajal
Senior Network Security and Core Specialist
CCIE #42930, 2xCCNP, JNCIP-SEC
Review Cisco Networking for a $25 gift card