RV320 Port forwarding?

[monkthecat]

Hey everyone,

I'm wondering if it's possible to do port forwarding for incoming traffic on a public IP address assigned to the WAN port on my RV320, but to have the traffic sent to a LAN IP, but on a DIFFERENT port.

Fore example, the RV320 has WAN IP 12.34.56.78. If someone outside our network sends a request to the ip 12.34.56.78 on port 8000, for example, I'd like to forward that port to and internal address, say 192.168.1.78, but on port 800 (instead of 8000).

I'd like to do this using the Web admin tool. Can anyone help?

[Flavio Miranda]

Hi,

Here we go:

Setup > Forwarding.

Add 

Take a look here:

https://sbkb.cisco.com/CiscoSB/GetArticle.aspx?docid=edd62db30afb43c8a1a2cca1c7959022_Port_Forwarding_and_Port_Triggering_on_RV320_Router.xml&pid=2&converted=0

[monkthecat]

The “Forwarding” section you mentioned does not allow me to change the destination port (for example, I can’t forward port 80 wan traffic to port 8000 on a private up).

[Flavio Miranda]

Take a look here. Pretty well explained.

https://crocimassimo.files.wordpress.com/2016/01/rv320_rv325-how-to-set-one-to-one-nat.pdf

[AlbertanDave]

Nope this PDF doesn't show any port address translation just forwarding.