sample config needed pix 515E 6.3(4) with DMZ, NAT, statics

[lorimavat]

Can anyone show me where to find a sample configuration for PIX 515E 6.3? Required:

static routes

NAT

DMZ with DNS server

Failover is configured, and appears to be working fine

[paddyxdoyle]

Hi,

The following link is similar to what you require

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a008015efa9.shtml

HTH

Paddy

[lorimavat]

Thanks for the help, but I'm still hving a lot of trouble with the DNS server on the DMZ. Can you provide an example of that?

Can access-lists be used without the access-group to apply them to an interface?

[a.alekseev]

What trouble do you have?

[lorimavat]

I'm trying to configure a DNS server on the DMZ. Could you have a look at this configuration please?