cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
144
Views
5
Helpful
2
Replies
Highlighted
Beginner

Syslog for PIX

I like to log everything to a Kiwi syslog server for my PIX 525 running software version 6.1 (1)

Here is the commands I am using with the output, but don't see to work. Am I missing something?

Syslog logging: enabled

Timestamp logging: enabled

Standby logging: enabled

Console logging: disabled

Monitor logging: disabled

Buffer logging: disabled

Trap logging: disabled

History logging: disabled

logging on

logging timestamp

logging standby

logging host inside 10.3.254.1

Thanks,

2 REPLIES 2
Highlighted
Beginner

Re: Syslog for PIX

You need to make use of the logging trap command so that the firewall knows what traps to send to your syslog server.

Beginner

Re: Syslog for PIX

You have to enter what type of event you would like to log.

logging trap

If you look at above.....Trap logging: disabled (You need a level here)

If you are using the PDM goto:

System Properties=>Logging=>Syslog

There you will find everything you will need. This is only if the syslog server itself is config'd properly.

Hope this helps.