01-14-2003 10:30 AM - edited 02-20-2020 10:29 PM
I like to log everything to a Kiwi syslog server for my PIX 525 running software version 6.1 (1)
Here is the commands I am using with the output, but don't see to work. Am I missing something?
Syslog logging: enabled
Timestamp logging: enabled
Standby logging: enabled
Console logging: disabled
Monitor logging: disabled
Buffer logging: disabled
Trap logging: disabled
History logging: disabled
logging on
logging timestamp
logging standby
logging host inside 10.3.254.1
Thanks,
01-14-2003 12:46 PM
You need to make use of the logging trap
01-14-2003 12:49 PM
You have to enter what type of event you would like to log.
logging trap
If you look at above.....Trap logging: disabled (You need a level here)
If you are using the PDM goto:
System Properties=>Logging=>Syslog
There you will find everything you will need. This is only if the syslog server itself is config'd properly.
Hope this helps.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide