Traffic Flow

[pillairamesh]

Hi

I have a successfully setup a VPN connection through Cisco PIX 506 (E) 6.3(5)

But certain HTTP traffic to port 8080 doesnt seems to pass.

How do i check where its getting blocked

How can i check which traffic is going through the VPN tunnel

cheers

Ramp

[acomiskey]

Are you trying a port translation in the firewall over the vpn? Something like this...

static (inside,outside) tcp 1.1.1.1 8080 192.168.1.10 80 netmask 255.255.255.255

If so are you then attempting http://1.1.1.1:8080 over the vpn?

You can check which traffic is going over the tunnel by looking at the pix config or by the route statistics on the vpn client.