09-03-2012 08:06 PM - edited 03-11-2019 04:49 PM
Dear
We have one ASA 5510 but we got the error attached periodically for IPSec/SSL VPN connection but i configured timeout connection as none
Am I did wrong configuration? Please advise! Thanks!
Hugo
09-09-2012 05:46 AM
SO , do you still have that problem even after changing the counters .
please do this , connect from a machine that is having the problem , while connected get the following :
show vpn-sessiondb detail
lets see if the changes you did are applied to that connection !
HTH .
Mohammad.
09-09-2012 11:40 PM
How to configure the tunnel idle timeout to none?
Hugo
09-09-2012 11:50 PM
Hi ,
for the group poilicy the client uses :
group-policy xyz attributes
vpn-idle-timeout none
for more your information:
http://www.cisco.com/en/US/docs/security/asa/asa84/command/reference/uz.html#wp1663941
HTH
Mohammad.
09-10-2012 12:02 AM
hi
I configured already but same result as above I mentioned
hugo
09-10-2012 12:13 AM
HI ,
can you check if the policy you see with :
show vpn-sessiondb
is the same where you have implemented the changes.
HTH
Mohammad.
09-10-2012 12:31 AM
Yes, I tried:
"show vpn-sessiondb detail
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide