cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2771
Views
0
Helpful
3
Replies

What ISE node does WLC point to?

uzochikwa
Level 3
Level 3

Hi Guys,

 

WHat ISE node is configured on WLAN contollers-PAN,MNT or PSN?

 

1 Accepted Solution

Accepted Solutions

All ISE policy-config is done on the PAN. But it gets synchronized to the PSN where the actual AAA-work is done. The controller (and for your wired deployment the switches) don't care about the PAN, they need to know which PSN to communicate with.

--
If you found this post helpful, please give it Kudos. If my answer solves your problem, please click Accept as Solution so others can benefit from it.

View solution in original post

3 Replies 3

The PSN is running the RADIUS-server (or TACACS for Device-Admin). All devices that are RADIUS- or TACACS-clients point to your PSNs.

--
If you found this post helpful, please give it Kudos. If my answer solves your problem, please click Accept as Solution so others can benefit from it.

Hi,

 

Thanks for your reply.SO on PSN you configure the contoller and on the contoller you configure the PSN?

All ISE policy-config is done on the PAN. But it gets synchronized to the PSN where the actual AAA-work is done. The controller (and for your wired deployment the switches) don't care about the PAN, they need to know which PSN to communicate with.

--
If you found this post helpful, please give it Kudos. If my answer solves your problem, please click Accept as Solution so others can benefit from it.
Review Cisco Networking for a $25 gift card