cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

BFD Configuration and Troubleshooting on Cisco IOS and XR routers.pptx

3922
Views
5
Helpful
1
Comments

This slide has covered " BFD Configuration and Troubleshooting on Cisco IOS and XR routers"

This slide explains following topics:

1) BFD Protocol Overview

2) How BFD works

3) BFD configuration in IOS

4) BFD configuration in XR

5) BFD configuration between IOS & XR node

6) Troubleshooting

To watch session video on " BFD Configuration and Troubleshooting on Cisco IOS and XR routers", Please click on following links:

Please share your valuable feedbacks and comments below.

Comments
Beginner

Hi Saurabh

I have a Catalyst 6509 switch running on code Version 12.2(18)SXF11. I have BGP running on this switch with my carrier. I would like to configure BFD under BGP but I see " fall-over  bfd" option is not available when I do "neighbor x.x.x.x fall-over bfd". However, I was able to configure bfd internal on my interface and show bfp neigh command just works(no output though).

 

Can you pls help me how to configure bfd under BGP on this switch?

 

thank you

MC

 

CreatePlease to create content
Content for Community-Ad
July's Community Spotlight Awards